Unboxing DragonBoard 410c and booting up on uart console

As a start a lot of details have been covered here:

http://www.cnx-software.com/2015/11/21/dragonboard-410c-development-board-quick-start-guide-and-android-benchmarks/

and here is the setup for uart console:

https://github.com/96boards/documentation/wiki/Dragonboard-410c-Installation-Guide-for-Linux-and-Android#setting-up-the-uart-console (A)

And yes, the UART console is done using a 1.8V FTDI adapter cable (which I used previously for Raspberry Pi):

http://www.aliexpress.com/item/2pcs-Lot-USB-To-RS232-TTL-Serial-Adapter-Cable-for-Raspberry-Pi-and-Banana-Pi/32262456765.html

And the S6 pins on the DragonBoard itself is 0-1-0-0. (which is after the stage where the SDcard have been flashed to the internal eMMC.

Details see the above URL link (A) (Flashing the SD Card Image to the DB410c).

And here is the bootup captured over the uart console of booting up from internal eMMC:

http://pastebin.com/EBiuuuAu

(which is Ubuntu 15.04 as you can see)

References:

https://www.96boards.org/wp-content/uploads/2015/02/96BoardsCESpecificationv1.0-EA1.pdf

https://developer.qualcomm.com/download/db410c/linux_android_board_support_package_vla.br_.1.2.4-01810-8×16.0-2.zip

https://github.com/96boards/documentation/wiki/Dragonboard-410c-Installation-Guide-for-Linux-and-Android#installing-image-using-an-sd-card-image

builds.96boards.org/releases/dragonboard410c/linaro/ubuntu/latest/dragonboard410c_sdcard_install_ubuntu*.zip

builds.96boards.org/releases/dragonboard410c/qualcomm/android/latest/dragonboard410c_sdcard_install_android*.zip

https://github.com/96boards/documentation/wiki/Dragonboard-410c-Installation-Guide-for-Linux-and-Android#create–install-a-rescue-image

https://github.com/96boards/documentation/wiki/Dragonboard-410c-Installation-Guide-for-Linux-and-Android#installing-image-using-an-sd-card-image

builds.96boards.org/releases/dragonboard410c/linaro/rescue/latest/dragonboard410c_bootloader_emmc_linux*.zip

builds.96boards.org/releases/dragonboard410c/linaro/ubuntu/latest/boot-linaro-vivid-qcom-snapdragon-arm64*.img.gz

builds.96boards.org/releases/dragonboard410c/linaro/ubuntu/latest/linaro-vivid-developer-qcom-snapdragon-arm64*.img.gz

https://developer.qualcomm.com/hardware/dragonboard-410c/tools

https://developer.qualcomm.com/download/db410c/little-kernel-boot-loader-overview.pdf

https://developer.qualcomm.com/download/db410c/android-display-overview.pdf

https://developer.qualcomm.com/download/db410c/sensors-porting-guide-dragonboard-410c.pdf

https://developer.qualcomm.com/download/db410c/linux_android_board_support_package_vla.br_.1.2.4-01810-8×16.0-2.zip

https://developer.qualcomm.com/download/db410c/linux-android-board-support-package-vla.br.1.2.4-00310-8×16-1.zip

https://developer.qualcomm.com/download/db410c/linux-ubuntu-board-support-package-v1.1.zip

https://developer.qualcomm.com/hardware/dragonboard-410c

https://github.com/96boards/documentation/wiki/Dragonboard-410c-Installation-Guide-for-Linux-and-Android

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: